In my 2nd Entry, I will doing a 3 for 1 by talking about the various Mechanical Switches one can find in Mechanical Keyboards, generally pre-built ones, along with the Customization options and how one can Create their own Keyboard.
As apart of my first Entry, I briefly talked about the 3 "keyfeels" of Mechanical Switches and had some examples, along with a couple videos to explain in more detail.
Before I get more into this, I will say that many people on r/MechanicalKeyboards on Reddit who are just getting into the hobby will tend to ask "What is the Best Keyboard/Switch I can buy". The question however is null as everything within this hobby is purely subjective so there is no such thing as "Best". Another important thing I should add well is Switches generally come in 2 Mounting Options. PCB Mount, and Plate Mount. PCB Mount uses 5 pins, while Plate uses 3 pins.
Here is a picture showing the differences with 2 Cherry MX Switches
Cherrys Patent expired some years ago and so many companies have been creating Clones (which is a good thing).
There are many companies that produce Mechanical Switches: Cherry, Gateron and Kailh (a subsidiary of Kaihua) are the 3 most Popular Brands that produce Mechanical Switches that people will go to. There are others such as Outemu, KBT, and Greetech that have their own Clones, along with Razer and their own in-house Switches, currently manufactured by Greetech. A local Company based here in British Columbia Canada, ZealPC, has his own Switches, dubbed Zealios which are Tactile. He also has Tealios which are Linear and Zilents which are the same as Zealios but have rubber dampeners on the Stem to help reduce sound when the stem hits the top and bottom of the switch housing; the same thing can be found in Cherrys Silent Red and Silent Black switches along with Gaterons equivalent clones.
Here's a 3D Render in GIF Form for a better picture of whats described:
(Source: Cherry MX Silent Red Switches)
Switches by Cherry found in many Pre-Built Keyboards will be Cherry MX Red, Blues or Browns, and often Silvers.
Some people will often lube their Switches to help make it be smoother then pressing and it can also help get rid of any additional noise. And you're likely thinking "people use KY Jelly to do this?!". The answer is no, despite how humorous that mental image probably is.
Many use Kryotox' lubricants as many of their products are rated for use on plastic and work perfectly. Another good alternative is SuperLube.
Here is a Deskthority page on it: Lubrication - Deskthority wiki
Many people will also clip and lube the Stabilizers for the longer keys (Spacebar, Shifts, Enter, and Backspace keys along with the +, 0 and Enter keys on the Numpad section if available) so they're quieter, as they generally rattle and make sound upon pressing down.
Here are a couple Youtube videos detailing how one can do both these from another favourite Youtuber of mine who deals with Mechanical Keyboards, Nathan Kim (who also does fantastic intros):
Here I'll dive into the Customization aspect, where Backlights, Underglow and Keycaps will fall into place.
Many people prefer to have their keyboards backlit for easier reading at night or aesthetic purposes, or both. These are done with either LEDs which are typically 3mm in size or with SMD LEDs, both of which are soldered to the PCB. The LEDs are generally more popular as SMD LEDs are far tinier and require a more precise hand to solder. They can be either mono coloured or multicoloured or even RGB and can be controlled from either the Keyboard itself via programming if hand built or if bought from a company like Corsair, using special Software created by the company.
Similar to above, however the only way to achieve this is by using 1.8mm LEDs and buying something such as KBDfans' Tina kit or Sentraqs own DIY kit and selecting the translucent case option. The glow can again be either mono coloured or RGB and be controlled by on-board programming using a program called QMK to program it to do these actions. (QMK is only for hand built boards and cannot be used with 3rd party keyboards, unless you switch out the controller board to something such as a Pro Micro and re-wire everything yourself)
This is where things get a little more interesting. Key Cap Sets are diverse and many are quite exotic looking, especially when it comes to Artisan Keycaps, which sound exactly as it is. People will typically use Resin to create their own Key Caps to sell. A popular Company that does this is called Jelly Key who host Group Buys (which is again exactly as it sounds; people sign up to get something and the person/people manufacture as many as there are signers and then send them out when its time which is generally several months ahead due to costs and manufacturing time)
Here is an example of one such Artisan Key Cap from Jelly Key from a previous theme dubbed "Crystal Chronicles"
Key Caps also come in regular looks as well. Here are a select personal favourites of mine:
Pulse (a 3D Rendering before Creation; this was from the initial Interest Check, which is a way of seeing how many people would be interested in potentially purchasing before any manufacturing and Group Buy plans happen)
Many companies will offer to create sleeved cables, some of them quite exquisite looking as well.
Here is a "White on Red" Coiled Cable, from Cable Car Designs
and a Split Cable for a Form Factor I will cover in the next entry
Last part of this entry:
Building your own
This can be one of the most easiest things to do if your skilled with a Soldering Iron already. If not, there are also people throughout the Mechanical Keyboard Community who can provide Soldering/Building services.
The easiest way to go about this is to buy:
a Plate if you're going to use Plate Mount Switches; these come in either ANSI or ISO layout (more between the two here: ANSI vs ISO - Deskthority wiki)
a PCB (must match your case of choice size wise)
and Key Caps
There are also Kits you can buy that come with everything you need. The only thing you need to do is put it together and then use QMK to program it (if required).
The process is super simple as well.
Clip/Lube Stabilisers if you wish and then follow this video guide; the process is basically the same for both PCB & Plate Mount styles:
I believe that's everything. If you have any Questions or Concerns, or spot any grammar errors, please, leave a comment below! Next time I will talk about the different Form Factors of Keyboards.
Welcome to Autism Forums, a friendly forum to discuss Aspergers Syndrome, Autism, High Functioning Autism and related conditions.Your voice is missing! You will need to register to get access to the following site features:
- Reply to discussions and create your own threads.
- Our modern chat room. No add-ons or extensions required, just login and start chatting!
- Private Member only forums for more serious discussions that you may wish to not have guests or search engines access to.
- Your very own blog. Write about anything you like on your own individual blog.
We hope to see you as a part of our community soon! Please also check us out @ https://www.twitter.com/aspiescentral